Images
Details
https://www.supercheapauto.com.au/p/alpine-alpine-s2-s68-6x8-coax-speakers-mid-range-230w/721857.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Alpine S2-S68 6x8" coaxial speakers mid-range 230W is part of Alpine's next-generation S-Series, designed to bring rich, detailed audio and powerful bass to your vehicle. These 6x8 inch coaxial car speakers combine a glass fibre composite woofer cone with a 1 inch soft dome tweeter, delivering accurate mids and smooth, detailed highs that extend up to 40kHz.
Power handling is rated at 75W RMS and 230W peak with 88dB sensitivity and 4 ohms impedance, giving dynamic, efficient performance from factory head units or outboard amplifiers. Alpine's patented High-Amplitude Multi-Roll (H.A.M.R.) surround works with a large strontium ferrite magnet structure to keep the cone under control at high volumes, producing punchy bass without distortion.
Built to a 220mm x 140mm frame with a 183mm x 126mm cutout and 60.5mm mounting depth, the S2-S68 is designed for straightforward replacement of factory speakers in a wide range of vehicles.
Features
- High-Amplitude Multi-Roll (H.A.M.R.) surround maintains cone control at high SPL
- Glass fibre composite woofer cone delivers rigid, low-distortion mids and bass
- Large strontium ferrite magnet structure increases cone excursion for louder output
- 75W RMS, 230W peak power handling suits a range of head unit and amp setups
- Frequency response of 75 Hz–40kHz captures fine high-frequency detail
- Smooth, accurate sound reproduction maintained across all volume levels
- 88 dB sensitivity for efficient output from modest amplifier power
- Lightweight, rigid cone construction supports factory-fit installation in multiple vehicles
- 1" soft dome tweeter adds smooth, detailed high-frequency extension
- 4 ohm impedance (3.1 ohm DCR) matches factory and aftermarket amplifiers
Tech Spec
| Woofer | 6×8″ (150mm × 200mm) Coaxial Speaker |
|---|---|
| Woofer Magnet Material | Strontium Ferrite |
| Tweeter | 1″ Extended-Range Soft Dome |
| Tweeter Magnet Material | Ferrite |
| Crossover Network (Woofer) | Copper Air-Coiled Wound Inductor |
| Crossover Network (Tweeter) | High Grade Audio Poly Capacitor |
| Woofer Mounting Diameter | 183mm × 126mm |
| Woofer Mounting Depth | 60.5mm |
| Peak Power | 230 Watts |
| RMS Power | 75 Watts |
| Frequency Range | 75 Hz – 40 kHz |
| Impedance | 4 Ohms |
| Sensitivity | 88 dB |