Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-gtx50-series-88mm-turbo-1950hp-1.24-a-r-t6-inlet/SPO10242194.html
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance GTX50 Series 88mm Turbo ZOO-GTX5020R-1.24-T6 is a dual ball bearing turbocharger built for high-horsepower petrol engine builds up to 1,950HP. It features a 13-blade billet aluminium compressor wheel with an aerodynamic tapered tip, an 88mm inducer and 120mm exducer at a 0.88 A/R, paired with an Inconel turbine wheel measuring 99mm inducer and 91mm exducer rated to withstand operating temperatures up to 900°C.
This GTX50 Series turbo uses a 1.24 A/R turbine housing with a T6 inlet and a ported-shroud compressor cover to resist surge while maintaining reliable, continuous boost delivery. A high grade cast iron turbine housing provides durability under sustained high-performance use, and the compressor cover includes a built-in speed sensor port. Each turbo ships complete with polished stainless steel V-band clamps, flanges, water fittings, a turbo drain gasket and an NPT 1/4 inch to -4AN oil feed fitting with a 1.6mm restrictor hole.
Features
- Ceramic ball bearing design improves turbo response and extends turbo lifespan
- 13-blade billet aluminium compressor wheel with aerodynamic tapered tip
- Compressor wheel temperature rated to 200°C for consistent high-load performance
- Anti-surge ported-shroud compressor inlet increases surge resistance for reliable boost
- Inconel turbine wheel withstands operating temperatures up to 900°C
- High grade cast iron turbine housing with 1.24 A/R and T6 inlet
- Rated 1,075–1,950 hp across 2.8L–11.0L engine displacement
- Speed sensor port built into the compressor cover
- Supplied complete with V-band clamps, flanges, water fittings and oil feed fitting
Tech Spec
| HP Rating | 1,075-1,950HP |
|---|---|
| Engine Displacement | 2.8L - 11.0L |
| Bearing Type | Dual Ball Bearing |
| Compressor Inducer | 88mm |
| Compressor Exducer | 120mm |
| Compressor A/R | 0.88 |
| Turbine Inducer | 99mm |
| Turbine Exducer | 91mm |
| Turbine Housing A/R | 1.24 (T6 Inlet) |
| Compressor Wheel Blades | 13 |
| Compressor Wheel Max Temperature | 200°C |
| Turbine Wheel Material | Inconel |
| Turbine Wheel Max Temperature | 900°C |
| Turbine Housing Material | Cast Iron |
| Oil Feed Fitting | NPT 1/4" to -4AN with 1.6mm restrictor hole |