Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-gtx42-series-70mm-turbo-950hp-1.26-a-r-t4-inlet/SPO10242150.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance GTX42 Series 70mm Turbo 950HP 1.26 A/R T4 Inlet is a dual ball bearing turbocharger built for performance engines rated between 475 and 950HP across 2.0L to 7.0L displacement. The 11-blade point milled billet aluminium compressor wheel sits inside an aluminium compressor housing fitted with a sensor port, with an anti-surge ported-shroud compressor inlet to increase surge resistance and deliver continuous power. The compressor wheel is temperature rated up to 200°C, while the Inconel turbine wheel maintains strength at operating temperatures up to 900°C and the high grade cast iron turbine housing adds durability under sustained high performance loads.
This turbo features a 1.26 A/R T4 inlet single scroll turbine housing, a 70mm compressor inducer wheel with a 94mm exducer wheel at 0.60 A/R, and an 82mm turbine inducer wheel with a 75mm exducer wheel. Each unit is supplied complete with stainless steel polished v-band clamps, flanges, water fittings, a turbo drain gasket and an NPT 1/4 inch to -4AN turbo oil feed fitting with a 1.6mm restrictor hole, ready for installation on a performance build.
Features
- Dual ceramic ball bearing design improves turbo response and prolongs service life
- 11-blade point milled billet aluminium compressor wheel rated to 200°C
- Anti-surge ported shroud compressor inlet increases surge resistance
- Inconel turbine wheel maintains strength at operating temperatures up to 900°C
- High grade cast iron turbine housing with 1.26 A/R T4 single scroll inlet
- Rated 475–950 hp for engines from 2.0L to 7.0L displacement
- Speed sensor port included in the compressor cover
- Supplied with v-band clamps, flanges, water fittings, drain gasket and NPT to -4AN oil feed fitting
Tech Spec
| HP Rating | 475-950HP |
|---|---|
| Engine Displacement | 2.0L - 7.0L |
| Bearing System | Dual Ball Bearing |
| Turbine Housing Inlet | 1.26 A/R with T4 Inlet |
| Compressor Inducer Wheel | 70mm |
| Compressor Exducer Wheel | 94mm |
| Compressor A/R | 0.60 A/R |
| Turbine Inducer Wheel | 82mm |
| Turbine Exducer Wheel | 75mm |
| Turbine Wheel Material | Inconel |
| Turbine Housing Material | High grade cast iron |
| Compressor Housing Material | Aluminium |
| Oil Feed Fitting | NPT 1/4" to -4AN with 1.6mm restrictor hole |