Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-gtx35-series-66mm-turbo-900hp-0.82-a-r-t3-inlet/SPO10242210.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance GTX3582R 66mm Turbo 0.82 A/R T3 ZOO-GTX3582R-0.82-T3 is a Gen II ball bearing turbocharger built for high-performance petrol engines rated 450-900HP across 2.0L to 4.5L displacement. A 10-blade point milled billet aluminium compressor wheel with an aerodynamic tapered tip sits inside an aluminium compressor housing fitted with a sensor port, delivering a 66mm inducer and 82mm exducer at 0.70 A/R with a 4 inch inlet hose and 2.5 inch outlet hose. An anti-surge ported-shroud compressor inlet increases surge resistance for reliable, continuous boost, while the dual ceramic ball bearing centre cartridge sharpens throttle response and extends turbo life.
On the hot side, this variant uses a 0.82 A/R T3 inlet turbine housing cast from high-grade cast iron for durability under sustained load, paired with an Inconel turbine wheel rated to 900 degrees Celsius featuring a 68mm inducer and 62mm exducer, a 2.5 inch band or T3 inlet and a 3 inch outlet hose. Each unit ships with polished stainless steel V-band clamps, flanges, water fittings, a turbo drain gasket, a 38mm oil drain flange and an NPT 1/4 inch to -4AN oil feed fitting with a 0.9mm restrictor hole.
Features
- Dual ceramic ball bearing design improves turbo response and prolongs service life
- 10-blade billet aluminium compressor wheel with tapered tip maximises horsepower and boost response
- Anti-surge ported-shroud compressor inlet increases surge resistance for reliable, continuous power
- Inconel turbine wheel withstands operating temperatures up to 900°C
- High-grade cast iron turbine housing delivers durability in high-performance applications
- 0.82 A/R T3 inlet turbine housing rated 450-900 hp across 2.0L to 4.5L displacement
- Supplied with stainless steel V-band clamps, flanges, water fittings and turbo drain gasket
- NPT 1/4" to -4AN oil feed fitting with 0.9mm restrictor hole included
Tech Spec
| HP Rating | 450-900HP |
|---|---|
| Engine Displacement | 2.0L to 4.5L |
| Bearing Type | Dual Ceramic Ball Bearing |
| Compressor Wheel | 10-Blade Point Milled Billet Aluminium |
| Compressor Inducer Wheel | 66mm |
| Compressor Exducer Wheel | 82mm |
| Compressor A/R | 0.70 |
| Compressor Inlet Size | 4" Hose |
| Compressor Outlet Size | 2.5" Hose |
| Turbine Wheel Material | Inconel |
| Turbine Inducer Wheel | 68mm |
| Turbine Exducer Wheel | 62mm |
| Turbine Housing Material | High grade cast iron |
| Turbine Housing Inlet | T3 Inlet |
| Turbine A/R | 0.82 |
| Turbine Outlet Size | 3" Hose |
| Oil Feed Fitting | NPT 1/4" to -4AN with 0.9mm restrictor hole |
| Oil Drain Flange | 38mm standard flange (centre to centre) |