Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-gtx35-series-58mm-turbo-750hp-0.82-a-r-t3-inlet/SPO10242140.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance GTX3576R 58mm Turbo 0.82 A/R T3 ZOO-GTX3576R-0.82-T3 is a dual ceramic ball bearing turbocharger rated at 400 to 750HP for engines from 2.0L to 4.5L displacement. The billet aluminium compressor wheel sits inside a ported shroud compressor cover with an integrated speed sensor port, increasing surge resistance while supporting a 58mm inducer and 76mm exducer wheel at 0.60 A/R. The turbine side uses a 68mm inducer and 52mm exducer wheel, machined from Inconel super alloy for strength at operating temperatures up to 900°C.
This GTX3576R variant is built with a T3 inlet single scroll turbine housing at 0.82 A/R, cast from high grade iron for durability in sustained high performance use. Every GTX3576R turbo is supplied complete with stainless steel polished v-band clamps, flanges, water fittings, a turbo drain gasket and an NPT 1/4 inch to -4AN turbo oil feed fitting with a 0.9mm restrictor hole, so the turbo is ready to install without sourcing additional hardware.
Features
- Dual ceramic ball bearing design improves turbo response and prolongs turbo lifespan
- Billet aluminium compressor wheel with ported shroud inlet increases surge resistance
- Compressor wheel is temperature rated to 200°C for consistent boost response
- Inconel turbine wheel withstands operating temperatures up to 900°C
- High grade cast iron turbine housing for durability in high performance use
- T3 single scroll inlet turbine housing with 0.82 A/R
- Rated 400 to 750 hp across 2.0L to 4.5L engine displacement
- Supplied with V-band clamps, flanges, water fittings and turbo oil feed fitting
Tech Spec
| HP Rating | 400-750HP |
|---|---|
| Engine Displacement | 2.0L-4.5L |
| Bearing Type | Dual Ceramic Ball Bearing |
| Turbine Housing Inlet | T3 Inlet Single Scroll |
| Turbine Housing A/R | 0.82 A/R |
| Compressor Housing A/R | 0.60 A/R |
| Compressor Inducer Wheel | 58mm |
| Compressor Exducer Wheel | 76mm |
| Turbine Inducer Wheel | 68mm |
| Turbine Exducer Wheel | 52mm |
| Compressor Wheel Material | Billet Aluminium |
| Turbine Wheel Material | Inconel |
| Turbine Housing Material | Cast Iron |
| Oil Feed Fitting | NPT 1/4" to -4AN with 0.9mm restrictor hole |