Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-g45-series-67mm-turbo-1125hp-1.01-a-r-t4-inlet/SPO10242161.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance G45 67mm Turbo 1125HP 1.01 A/R T4 ZOO-G45-1125-1.01-T4 is a dual ball bearing turbocharger built for engines from 2.0L to 8.0L displacement rated between 600HP and 1125HP. It uses a ported shroud compressor cover with an integrated speed sensor port, and this configuration runs a single scroll T4 turbine housing at 1.01 A/R.
This G45 Series turbo pairs a 13-blade billet aluminium compressor wheel, with a 67mm inducer and 102mm exducer at 0.85 A/R, against an 89mm inducer and 82mm exducer Inconel turbine wheel rated to withstand operating temperatures up to 900°C. The cast iron turbine housing is built for durability under sustained high performance loads, and every turbo ships complete with stainless steel polished v-band clamps, flanges, water fittings, a turbo drain gasket and an NPT 1/4 inch to -4AN oil feed fitting with a 1.6mm restrictor hole.
Features
- Dual ceramic ball bearing design improves turbo response and lifespan
- 13-blade billet aluminium compressor wheel with ported shroud for strong boost response
- Inconel turbine wheel withstands operating temperatures up to 900°C
- Cast iron turbine housing with 1.01 A/R T4 inlet for durability
- 67mm compressor inducer and 102mm exducer wheel rated 600–1,125 hp
- Suits 2.0L–8.0L displacement engines
- Includes V-band clamps, flanges, water fittings and oil feed fitting with 1.6mm restrictor
- Compressor housing fitted with speed sensor port and anti-surge inlet
Tech Spec
| HP Rating | 600-1125HP |
|---|---|
| Displacement Range | 2.0L - 8.0L |
| Bearing Type | Dual Ceramic Ball Bearing |
| Compressor Inducer Wheel | 67mm |
| Compressor Exducer Wheel | 102mm |
| Compressor A/R | 0.85 |
| Turbine Inducer Wheel | 89mm |
| Turbine Exducer Wheel | 82mm |
| Turbine Housing Inlet | 1.01 A/R T4 Inlet |
| Turbine Wheel Material | Inconel |
| Turbine Housing Material | High grade cast iron |
| Included Fittings | Stainless steel polished v-band clamps, flanges, water fittings, turbo drain gasket and NPT 1/4 inch to -4AN oil feed fitting with 1.6mm restrictor hole |