Images
Zoo Performance
Details
https://www.supercheapauto.com.au/p/zoo-performance-g25-series-54mm-turbo-660hp-0.49-a-r-t25-inlet/SPO10242225.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Zoo Performance G25-660 54mm Turbo with a 0.49 A/R T25 inlet is built for performance engines rated between 350 and 660HP. Dual ceramic ball bearings optimise turbo response and extend service life, while the 9-blade aluminium compressor wheel and ported shroud compressor cover add anti-surge resistance for consistent boost. The compressor wheel is rated to 200°C and pairs with a 54mm inducer, 67mm exducer and 0.70 A/R compressor housing.
The Zoo Performance G25-660 turbine wheel is manufactured from Inconel super alloy, holding its strength at operating temperatures up to 900°C, and runs through a high grade cast iron turbine housing with a 54mm inducer, 49mm exducer and a 0.49 A/R T25 single scroll inlet. Every turbo ships complete with polished stainless v-band clamps, flanges, water fittings, a turbo drain gasket and an NPT 1/4 inch to -4AN oil feed fitting with a 0.9mm restrictor hole, suiting engines from 1.4 to 3.0 litre displacement.
Features
- Dual ceramic ball bearing design improves turbo response and extends service life
- 9-blade aluminium compressor wheel with aerodynamic tapered tip
- Ported shroud compressor cover adds anti-surge resistance for consistent boost
- Compressor wheel rated to withstand temperatures up to 200°C
- Inconel turbine wheel holds strength at operating temperatures up to 900°C
- High grade cast iron turbine housing built for high performance durability
- 0.49 A/R T25 single scroll turbine housing inlet
- Rated 350–660 hp for engines from 1.4–3.0 Litre displacement
- Supplied with v-band clamps, flanges, water fittings and oil feed fitting
- 1 year warranty against manufacturing defects
Tech Spec
| HP Rating | 350-660HP |
|---|---|
| Engine Displacement | 1.4L - 3.0L |
| Bearing Type | Dual Ceramic Ball Bearing |
| Compressor Inducer Wheel | 54mm |
| Compressor Exducer Wheel | 67mm |
| Compressor Housing A/R | 0.70 A/R |
| Turbine Inducer Wheel | 54mm |
| Turbine Exducer Wheel | 49mm |
| Turbine Housing Inlet | 0.49 A/R T25 Inlet |
| Compressor Wheel Material | Aluminium, 9-blade |
| Turbine Wheel Material | Inconel |
| Turbine Housing Material | Cast Iron |
| Max Compressor Wheel Temperature | 200°C |
| Max Turbine Wheel Temperature | 900°C |
| Oil Feed Fitting | NPT 1/4" to -4AN with 0.9mm restrictor hole |
| Included Hardware | Stainless steel polished v-band clamps, flanges, water fittings, turbo drain gasket |