Images
Details
https://www.supercheapauto.com.au/p/xtm-4x4-accessories-xtm-12v-1000w-pure-sine-wave-inverter/722828.htmlPromotions
Additional Information
Product Info
Product Info
The XTM 1000W Pure Sine Wave Inverter delivers clean, reliable 240V AC power, making it perfect for running sensitive electronics and appliances off-grid. With 1000W continuous output and 2000W surge capacity, it ensures smooth operation for devices that require a stable current.
Built with a 90% efficiency rating and multiple safety protections including over-voltage, under-voltage, short circuit, and over-temperature, it offers both performance and peace of mind. Compact and lightweight, it’s an excellent choice for 4WD, camping, and touring setups.
FAQs
What can the XTM 12V 1000W Pure Sine Wave Inverter power?
It’s suitable for laptops, cameras, drones, tablets and mobile phones, making it a handy bit of kit for your everyday electronics needs.
What battery and BMS size do I need for my inverter?
The XTM 1000W Inverter should be used with a battery with ≥100A BMS.
How much power does this inverter deliver?
This inverter provides 1000W of continuous power and a 2000W peak power surge.
Does this inverter produce pure sine wave power?
Yes, it features pure sine wave output for running sensitive electronics.
What battery types is this inverter compatible with?
It is compatible with 12V Lithium and AGM batteries.
What is the input voltage range?
The input voltage range is 10.5-15.5V.
What outputs are included?
It includes 1 x 240V AC output rated at 50Hz 4.2A and 1 x USB Type-A output rated at 5V 2A.
What safety protections are built into this inverter?
Safety features include under-voltage, over-voltage, output-overload, short circuit and over-temperature protection.
Does it have a cooling fan?
Yes, it features a silent cooling fan.
Can I use a remote switch with this inverter?
Yes, it has a remote switch port, with the remote switch sold separately.
What is the maximum efficiency of this inverter?
The maximum efficiency is 90%.
Does the inverter use power even when nothing is plugged in?
Yes. If the inverter is left ON, it will slowly drain your battery even with no load. Always switch it OFF when not in use to avoid a flat battery.
Are there any special installation or ventilation requirements?
Leave at least 5 cm of space around the inverter and make sure hot air can escape from the installation area so it stays cool and works properly.
Why did my inverter shut down even though my battery looked full?
This usually means the battery or BMS is undersized, the cables are too thin or too long, or the voltage dropped under load. The inverter will shut down to protect itself.
Do I need a fuse between the battery and the inverter?
Yes it is highly recommended. A fuse protects your battery and wiring if there’s a short circuit or fault. The XTM Inverter Universal Wiring Kit (sold separately) includes a prewired fuse.
Can I run multiple appliances at the same time?
Yes, as long as the total power of all appliances combined does not exceed the inverter’s rated wattage. If you exceed it, the inverter will shut down to protect itself.
Is it normal for the inverter to feel hot?
Yes. Inverters generate heat during use, especially at higher loads. This is normal, as long as there is good ventilation and airflow around the unit.
Why does this inverter have cooling fans, and when do they run?
The cooling fan is temperature controlled. It only runs when needed, which reduces noise, saves power, and helps the inverter last longer compared to always-on fans.
Can I connect the inverter to mains power?
No. This inverter must never be connected to grid power. Connecting mains power to the inverter’s AC outlets will instantly damage the unit and is dangerous.
Why does the inverter show power but the appliance doesn’t work properly?
Some appliances draw more power than shown on the label or have high startup loads. This can cause the inverter to protect itself and shut down.
Why does the inverter spark slightly when connected?
A small spark during first connection is normal and caused by internal components charging.
Features
- Rated Output Power: 1000W
- Surge Power(Peak Power): 2000W
- Output Wave Form: Pure Sine Wave
- Input Voltage Range: 10.5-15.5V DC
- Output Voltage & Current: 240V AC, 50Hz, 4.2A
- USB Output: Type-A 5V DC 2A
- Maximum Efficiency: 90%
- Safety features include: over-voltage, under-voltage, short circuit & over-temperature
- Dimensions: 360x213x80mm
- Weight: 2.56kg
Tech Spec
| BATTERY CAPACITY | 100Ah or above |
|---|---|
| MINIMUM DC BATTERY CABLE SIZE | 1m 16mm2 |
| FUSE SIZE | 150A |
| INPUT VOLTAGE | 12V DC Battery (10.5V to 15.5V) |
|---|---|
| OUTPUT | 220-240V AC 50Hz |
| CONTINUOUS POWER | 1000W |
| PEAK (SURGE) POWER | 2000W |
| INVERTER CLASSIFICATION | Equipotentially Bonded Inverter |
| OUTPUT WAVEFORM | Pure Sine Wave |
| NO LOAD CURRENT DRAW | 1.2A |
| EFFICIENCY | >88% Full load / >90% Half load |
| LOW BATTERY ALARM/SHUTDOWN | Alarm 11V, Shutdown 10.5V |
| ADDITIONAL FEATURES | USB-A Output 5V 2A; Inverter On/Off Switch; Integrated Mounting Points; Remote Switch Port |
| COOLING FAN | Automatic Temperature And Power Control Fan |
| OPERATING TEMPERATURE | -20°C to 50°C |
| SAFETY FEATURE | Under-voltage / Over-voltage Protection, Output Overload / Short Circuit Protection, Over Temperature Protection |
| DIMENSIONS | 360(L) x 213(W) x 80(H)mm |
| WEIGHT | 2.56KG |
| WARRANTY | 12 month warranty |