Details
https://www.supercheapauto.com.au/p/unimig-150-amp-spool-gun/SPO9967543.htmlPromotions
Additional Information
Product Info
Product Info
The UNIMIG 150 Amp Spool Gun 6m, PLSP150A is a Binzel style MIG torch built for welding softer wires such as aluminium. The spool and drive system sit right at the torch, shortening the wire path so feeding stays consistent and the wire is far less likely to kink or birdnest. Maximum output is 150A, with a wire size range of 0.6 to 1.0mm.
The spool gun uses a clear plastic housing so the moving parts and remaining wire stay in view while you weld, and the motor is rated for a minimum service life of 1,000 hours. A rear cable support holds the wire on line no matter the angle you approach from, while the spool-on DURAFLEX performance cable delivers flexibility along with high heat and abrasion resistance across its 6m length.
Air cooled operation gives a duty cycle of 60% at 150A on CO2 and 60% at 130A on mixed gas, suiting panel repairs, alloy fabrication and general aluminium MIG welding.
Features
- 150A output welds wire up to 1.0mm thick
- Suits softer wires such as aluminium for smooth, consistent feeding
- DURAFLEX performance cable combines flexibility with high heat and abrasion resistance
- Clear plastic housing shows the wire feed and remaining spool at a glance
- Motor rated for a minimum service life of 1,000 hours
- Rear cable support keeps the wire feeding at any working angle
- Air cooled torch with a 60% duty cycle at 150A on CO2
- 6m cable gives extra reach around larger fabrication jobs
Tech Spec
| Maximum Output | 150A |
|---|---|
| Wire Size | 0.6-1.0mm |
| Cooling Method | Air Cooled |
| Duty Cycle - CO2 | 60% @ 150A |
| Duty Cycle - Mixed Gas | 60% @ 130A |
| Cable Length | 6m |
| Motor Service Life | Minimum 1,000 hours |
| Cable Type | DURAFLEX Performance Cable |