Details
https://www.supercheapauto.com.au/p/ryco-ryco-oil-filter-z929/542908.htmlPromotions
Additional Information
Product Info
Product Info
The Ryco Oil Filter Z929 is engineered to deliver efficient engine protection across full-flow and bypass oil gallery systems. Its advanced filter media captures contaminant particles that could otherwise damage critical engine components, including the bearings and crankshaft. Ryco's selection of media meets or exceeds OE standards, ensuring dependable protection throughout the full service interval.
Built to withstand oil pressure levels exceeding manufacturer specifications, this filter endures the rigours of cold start surge pressures and sustained high pressure operation. Internal components are crafted to endure the demands of daily driving, maintaining integrity even under stress. An anti-drain-back valve and relief valve help maintain steady oil flow at start-up and under pressure. Every Ryco filter is tested to international ISO and SAE standards in Ryco's dedicated filtration laboratory, guaranteeing consistent performance across every application.
Shop the Ryco Range
Shop Cabin Air Filters
Shop Fuel Filters
Shop Filter Removal Tools
Shop Air Filters
Shop Oil Filters
Features
- Engineered for efficient engine filtration across full-flow and bypass oil gallery systems
- Captures contaminant particles to protect engine bearings and crankshaft from wear
- Withstands oil pressure levels exceeding manufacturer specifications for dependable protection
- Internal components designed to endure cold start surge pressures during daily driving
- Filter media selection meets or exceeds OE standards for full service interval protection
- Tested to international ISO and SAE standards in Ryco's dedicated filtration laboratory
- Fitted with an anti-drain-back valve and relief valve for consistent oil flow at start-up
- Careful media selection ensures filter meets/exceeds OE lifespan, protecting engine throughout service
- New vehicle warranty protection
Tech Spec
| Filter Type | Spin-on, full-flow/bypass |
|---|---|
| Thread Size | M26 x 1.5 |
| Outer Diameter | 80mm |
| Height | 99mm |
| Gasket/Seal Diameter | 77mm |
| Anti-Drainback Valve | Yes |
| Bypass Valve Setting | Relief valve fitted (setting not published) |
| Micron Rating | 35 micron (@ 98.7% efficiency) |