Images
Details
https://www.supercheapauto.com.au/p/kincrome-kincrome-5pc-ratchet-vehicle-positioning-jack-set/SPO8232011.html
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
- Instant approval online
Own it now, pay later
- For everyday spending up to $8,000
- Nothing to pay today
- Interest free always
- Flexible repayments
Promotions
Additional Information
Product Info
Product Info
The Kincrome Ratchet Vehicle Positioning Jacks Set 5 Piece K12192 helps workshops reposition vehicles quickly and safely. Four ratcheting jacks lift each tyre off the ground via a foot-operated mechanism that squeezes roller-equipped support legs together, then 360° swivel castors let you manoeuvre the vehicle in any direction.
The ratcheting design outperforms hydraulic jacks because it needs no fluid replacement, cannot blow seals or leak, and stores on its side without risk of air-lock. Each jack carries a 684kg rated capacity and fits tyres up to 330mm wide, with an adjusting range of 285–660mm, suiting most passenger cars, 4WDs and light trucks. A storage stand attaches to one of the four jacks as its base, holding the other three upright so the set packs away without using extra floor space.
Features
- Ratcheting mechanism outlasts hydraulic jacks, with no fluid changes, blown seals or leaks
- Foot-operated ratchet squeezes roller-equipped support legs to lift the tyre safely off the ground
- 684kg rated capacity per jack suits most cars, 4WDs and light trucks
- Fits tyres up to 330mm wide with an adjusting range of 285–660mm
- 360° swivel castors let you reposition a vehicle in any direction with minimal effort
- Storage stand attaches to one jack and holds the other three upright, saving floor space
- Stores on its side without risk of air-lock, since there is no hydraulic fluid
- Set includes 4 ratchet vehicle positioning jacks, 1 storage stand and instruction manual
Tech Spec
| Lifting Capacity (kg) | 684kg each |
|---|---|
| Minimum Height (mm) | 285mm |
| Maximum Height (mm) | 660mm |
| Material | Carbon Steel |
| Weight (kg) | 14.7kg per jack, 2.45kg stand |
| Castors | 4" Nylon (2 x Swivel, 360°) |
| Part Number | K12192 |
| Contents | 4 x K12190 Ratcheting Vehicle Positioning Jacks; 1 x K12191 Vehicle Positioning Jack Stand |
| Lifting Mechanism | Foot-operated ratchet with roller-equipped support legs |
| Frame Construction | 3-Section Steel Frame |
| Locking Pin | Yes |
| Required Surface | Hard, flat, level surface only |
| Suitability | Cars, 4WDs & Light Trucks |