We all love how clean and shiny a vehicle looks after a good clean and polish - but a lot of us don't have the time. An electric buffer can help speed up this process, along with quality products to help keep that shine for longer.
Like any power tool, it takes a little time to get comfortable and build up a technique. Make sure you practice on a piece of scrap before moving over to your vehicle.
The Rotary Buffer is designed to heavily cut the surface paint. It is great for eliminating swirls, scratches and paint defects but is more prone to causing paint damage.
The Random Orbital Buffer varies the point of contact to minimise the risk of damage. However, Random orbital buffers are only suited for removing light paint swirls and blemishes. It has little effect on scratches and paint defects.
Before you start, ensure you are working in a well-lit area. Good lighting will allow you to see swirling, scratches and defects clearly.
Once the panel is dry apply a small dab of polish to the applicator pad.
For metal, an automatic centre punch provides starting point for the drill bit and stops it wandering around the metal ruining the surface.
Place the buffer onto the panel and spread the polish before switching it on.
Move the buffer constantly in an overlapping motion left to right and up and down
Start with a low speed of rotation and slowly increase the speed but stay within the lower speed ranges to prevent damage.
Buffers only require a light pressure to work. Keep your touch light.
Work in small sections completing one before moving on to the next.
A light spray of quick detailer onto the pad can make application easier.
When the polish beings to dry or turn clear use a micro fibre cloth to remove the residue. Inspect the results and if you are satisfied move onto the next section.
*Important information* - Click here to read more about our How-To terms and conditions.