Is this product for you?
Ball joints come in all shapes and sizes, meaning ball joint removal tools need to be versatile. Now you can have all the options you need with a ToolPRO Ball Joint Separator Kit. Arranged neatly inside the case are five tools to suit every job. There are large and small pitman arm pullers, an L shape ball joint remover, a ball joint separator, and a tie rod puller. The large C shape pitman arm puller is brilliant on heavy four wheel drive joints. Just wind the pressure screw tight, tap the end with a hammer, and continue until the joint breaks free. Where this is too large, the smaller pitman arm puller works the same way, on a smaller scale. This ball joint separator uses a lever action - getting right into difficult areas. The removable hinge pin can be repositioned for a greater jaw width if necessary. Then just slip the jaws beneath the ball joint - and wind up the pressure screw to separate the joint. The L shape ball joint remover is great for the smaller tie rod ends. It offers a unique angle and compact size for those tricky areas. Simply wind back the pressure screw, slip the fork under the ball joint; and tighten the pressure screw until the ball joint pops. To remove the largest tie rods, or even pull inner bearing races free; pick the outer tie rod puller. This tool is similar in design to the C shape pullers, but its pivoting arms provide the most flexibility of any item in the kit. With a ToolPRO Ball Joint Separator Kit handy, you’re armed with the perfect tool to accomplish all of these tasks, and much much more.