1. Ensure surfaces are clean and dry. Remove cap and apply to one surface.
2. Bring surfaces together and if necassary, clamp or tape to support until adhesive sets - for porous surfaces such as wood and ceramics, practicle strength is usually achieved within 12hours. *Allow longer times for non-porous surfaces such as metals and plastics.
3. Product cures rapidly, wipe nozzle clean and tightly replace cap immediately. Store upright in a cool dry place.
4. Clean up before adjesive sets with turps or acetone.
> Not for permanent water immersion.
> Will yellow on direct exposure to UV.
> Use Selleys All Plastic Fix for Polyethylene and Polypropylene.
Tip: To reduce set times on non-porous surfaces, keep surfaces apart for 30 seconds before bringing together.
Heat resistant -15°C to +120°C
Extreme resistance to shock, vibration, movement & water
Suitable for interior & exterior use