Details
https://www.supercheapauto.com.au/p/noco-noco-12-24v-26a-smart-batterycharger-240v/SPO7262323.htmlPromotions
Additional Information
Product Info
Product Info
Charging a battery doesn't take a Genius, but it sure helps to have one with you anyway. The Noco Genius UltraSafe Pro-Series Range is here to redefine quality, ease and value for money when it comes to car battery charging. The perfect solution for the modern driver, these units are suitable for most modern chemistry types including Lithium, with a fully automatic process capable of charging from as low as 2 Volts. The inbuilt diagnostic stage will help identify dead cells to avoid time wasted trying to revive a truly dead battery, while advanced desulphation procedures help breathe life back into units that can still be saved. Safe for use with modern stop/start and CAN bus equipped vehicles, this charger is fitted with spark proof technology as well as reverse polarity and overcharge protections, so you can rest easy knowing that you and your battery are safe even in cases of accidental terminal misconnection.
The 26 Amp G26000 is suitable for use as a 12V and 24V battery charger, capable of recharging and long-term maintenance of batteries 50AH and above. Jumpcharge technology forces a high current short term blast of power through the battery, allowing you to start from completely flat in under 5 minutes. This robust unit also features a DC output mode, perfect for keeping vehicle electronics and small appliances running when a battery is down and out - perfect for workshops or home garage set-ups.
Features
- Suitable for charging and maintaining 12V and 24V Standard Lead Acid, AGM, GEL, Calcium and Lithium batteries
- Fully automatic charging cycle, capable of charging from as low as 2 Volts
- Spark-proof technology, overcharge and reverse polarity protection keep you and your battery safe against accidental terminal misconnection
- Progressive desulphating repair charging stage rejuvenates worn out cells
- Inbuilt diagnostic function saves you time and money charging truly dead batteries
- Built in 12V DC power supply perfecting for keeping power flowing during battery changes
- High intensity Jumpcharge feature gets a flat battery running in 5 minutes
- Can be used with start-stop and CAN bus vehicle systems
- 5 year warranty for ultimate peace of mind
- Jumpcharge engine starting feature for dead batteries
Tech Spec
Voltage Suitability: | 12V / 24V |
---|---|
Minimum Charging Voltage: | 2V |
Charging Amperage: | 26A @ 12V / 13A @ 24V |
DC Power Supply Voltage: | 5A @ 13.6V |
Engine Start Supply Amperage: | 30A @ 12V for 5 mins |
Charging Stages: | 1: Analyse / 2: Diagnose / 3: Recovery / 4: Initialise 5: Bulk / 6: Absorption / 7: Optimisation / 8: Maintenance (Float) |
Chemistry Suitability: | Standard Lead Acid / AGM / GEL / Calcium / Lithium |
Amp Hour Charging Range: | 50-500AH @ 12V / 50-250 @ 24V |
Protections: | Spark-Proof / Reverse Polarity / Short Circuit / Over Charge |
Warranty: | 5 years |