Convertible car seats are designed to keep very young children safe in the car and are suitable for new born children up until around 4 years old.
For the first 6 months it is safer to mount the convertible seat facing rearward but never on a rear facing seat.
What You'll Need
- Jockey wheel
- Suitable U-bracket, for swing models, or suitable bracket for fixed models
- Support stands or vehicle fitted with tow bar
- Level surface
Step 1 - Locate Mount Point
If no jockey wheel is currently fitted, locate an area on the draw bar where no other fixtures, fittings or wiring is mounted.
Place support stands underneath the draw bar or attach the trailer to a tow bar.
Step 2 – Attach U-Brackets
On a swing away jockey wheel you will notice a number of holes in the mounting plate.
Holding the jockey wheel up to the draw bar, slide a u-bracket over the draw bar and through the appropriate holes in the mounting plate.
Tighten each of the nuts.
Step 3 - Lower Jockey Wheel
Test swing away operation by using the handle.
Step 4 - Adjust Height
Adjust jockey wheel height by turning the handle on top.
*Important information* - Click here to read more about our How-To terms and conditions.