Please wait, your shopping cart is being loaded.
0
Items
Subtotal:

Thermatic Fan Instructions?

Question from D. Powell:

I've just purchased a Calibre 12" Thermatic Fan for use on an airconditioner condenser. 1. The kit includes 4 long plastic zip-like strips. There are no illustrations nor instructions referring to these. 2. The fan wiring has a factory-fitted 2-pin male 'T' connector but no female connector has been supplied to connect to the relay wiring. There are 2 crimp tubes supplied which suggest that the 'T' connector should be cut-off and discarded? Could you please advise? Thank you.


Answer:

The range of Calibre Thermo fans are predominately used as radiator cooling fans but can also be used as an air conditioner condenser. With the majority of radiator fans using the T connector we used this as the connector on the unit. As stated there are also 2 crimp terminals in the kit which does allow for this connector to be cut off if required and use the crimps. As for the zip like strips these are used to secure the fan onto the face of the radiator by going in between the fins. Be sure as to not damage the fins whilst securing. Being an aftermarket unit and not an original assembly you may have to look for different ways to secure the unit depending on the vehicle make and the unit you are fixing it to.


Loading...