Please wait, your shopping cart is being loaded.
0
Items
Subtotal:

Tips for re-spraying your car?

Question from Raegan:

Im thinking of respraying my Toyota corrola hatch in enemal could you please give me the steps on respraying it.

Answer from Septone:

Step 1.
All existing paintwork would need to be washed with wax and grease remover to remove old car polish, bitumen and grease then sanded with 320-400 grit wet or dry sandpaper.

Step 2.
Mask off all areas and wash with wax and grease remover again, apply 2 coats of primer filler and allow primer to dry for a minimum of 2 hours.

Step 3.
Lightly sand primer filler with 600 grit wet or dry sandpaper until smooth, wash again with wax and grease remover and apply 3 coats of spraying enamel.

Refer directions for use on the back label of each product for thinning ratios, drying times etc.

Note: Quick dry enamel is not recommended for vehicles as it does not provide long term UV resistance. We recommend Acrylic Lacquer for all automotive refinish applications.

You can also watch the Training video on http://www.septone.com.au


Loading...